Tactical LED Flashlight VIDEX VLF-AT366 1000Lm 5000K

Tactical LED Flashlight VIDEX VLF-AT366 1000Lm 5000K is designed for personal use at night or in unlit indoor areas. Its main features include waterproofing, a durable body, long-range illumination, tactical mounting, and the availability of red light. It allows you to select not only the desired operating mode but also the light color: white or red. Another advantage of the flashlight is the adjustable focus. It can be operated using the VIDEX VLF-ARM-02 tactical button (not included). A flashlight lanyard is used for convenient handling and transportation. The set also includes a clip, a spare cover for the tactical button, and a Picatinny rail mount. The Picatinny mount is useful when the flashlight needs to be attached to a weapon. To mount the flashlight on a rail, unscrew the locking nut counterclockwise, place the flashlight on the rail, and then tighten the nut clockwise. Maximum brightness is 1000Lm. The flashlight uses a Luminus SST40 10W LED for white light. Flashlight Control The flashlight features a simple button control system, allowing easy switching between lighting modes and one-handed operation. It has two control buttons: the tail button and the mode switch button, as well as a color selector. 1. The tail button, located at the bottom of the body, provides quick access to the flashlight. A partial press turns the light on, and releasing it turns the light off. Alternatively, the light can be turned on and off with a full press of the tail button. 2. A simple press of the mode switch button while the flashlight is on cycles through brightness modes, while a long press (3 seconds) activates the STROBE mode. To exit STROBE, press the mode switch button again. 3. Turn the color selector to «R» to enable red light, or to «W» to enable white light. 4. To narrow the beam angle, turn the focus mechanism to the right; to widen the beam, turn it to the left. Operating Modes: HIGH (Maximum Brightness Mode) – light output 1000Lm. Beam distance 200m. Runtime 2h. Luminous intensity 11200 cd. MOON (Night Mode) – maximum runtime in this mode is 105h, generating a light output of 5Lm. Beam distance 10m. Luminous intensity 20cd. STROBE – rapidly emits repeating bright white light pulses. Light output 1000Lm. Runtime 2h. Beam distance 200m. Luminous intensity 11200 cd. Runtime in STROBE mode is the total time tested with overheat protection enabled. RED HIGH (Red Light Maximum Power) – light output 80Lm. Beam distance 30m. Runtime 3h. Luminous intensity 195cd. RED LOW (Red Light Minimum Power) – light output 5Lm. Beam distance 15m. Runtime 120h. Luminous intensity 43cd. Red light is provided by a GREE XPE 3W LED. Runtime is tested with the standard 18650 2200mAh battery. Specifications may vary depending on the environment. The flashlight automatically remembers the selected mode. The LED indicator on the button shows the flashlight’s battery level: - Green solid: full charge (100–80%) - Green blinking: medium charge (79–50%) - Red solid: low charge (49–25%) - Red blinking: very low charge (24–1%) Charging is available via USB-C cable. The flashlight uses 18650-type rechargeable batteries. WARNING! Do not use the flashlight while charging. The flashlight is well-protected and designed for use in tough and extreme conditions. It can withstand mechanical stress and drops from height. It can fall from 1m without damage. The flashlight has dust and water resistance – IP66. This excellent, modern, high-performance flashlight is a reliable companion for outdoor activities. Easy to use. Comes with a 3-year warranty on the flashlight and a 1-year warranty on the battery. The warranty does not cover accessories.