LED Headlamp VIDEX VLF-H147 700Lm 5000K

LED Headlamp VIDEX VLF-H147 700Lm 5000K is designed for personal use during nighttime or in unlit indoor areas. Its key features include waterproofing, a durable body, and long-range illumination. It allows you to select not only the desired operating mode but also the light color: white or red. Another advantage of the headlamp is the adjustable tilt angle, which can be changed by simply rotating it up or down. The set includes a head strap made of wear-resistant, soft-textured material for comfortable use. Maximum brightness is 700Lm. The headlamp has GREE XPG3 + 3W COB LEDs, providing high brightness and energy efficiency. Operating the headlamp 1. To turn on the lamp and switch between lighting modes, rotate the rotary switch. 2. Pressing the button briefly (0.5 sec) activates or deactivates the red light depending on its current state. 3. When the red light is active, a simple press of the button switches between its modes. 4. A single press on a turned-off lamp allows you to check the battery level. Lamp operating modes: TURBO – maximum brightness of 700Lm. Lighting distance: 185m. Runtime: 2 hours. Light intensity: 11600cd. TURBO runtime is the total time tested with overheat protection enabled. HIGH (Maximum light power mode) – brightness 550Lm. Lighting distance: 185m. Runtime: 4 hours. Light intensity: 8800cd. MIDDLE (Medium light power mode) – brightness 200Lm. Lighting distance: 120m. Runtime: 5 hours 30 min. Light intensity: 3840cd. LOW (Minimum light power mode) – brightness 70Lm. Lighting distance: 65m. Runtime: 13 hours 30 min. Light intensity: 1040cd. COB HIGH (Close-range maximum power light) – brightness 200Lm. Lighting distance: 20m. Runtime: 4 hours. Light intensity: 104cd. COB LOW (Close-range minimum power light) – brightness 50Lm. Lighting distance: 10m. Runtime: 10 hours 30 min. Light intensity: 32cd. RED HIGH (Maximum red light) – brightness 20Lm. Lighting distance: 5m. Runtime: 4 hours. Light intensity: 4.8cd. RED LOW (Minimum red light) – brightness 5Lm. Lighting distance: 3m. Runtime: 18 hours 30 min. Light intensity: 1.36cd. RED FLASH (Flashing red light) – brightness 8Lm. Runtime: 12 hours. Lighting distance: 3.5m. Light intensity: 2.2cd. The above parameters may vary depending on the environment. The lamp automatically remembers the selected red light mode. The lamp has a 5-level indicator showing the battery charge level: - 5 bars lit (100–80%) - 4 bars lit (79–60%) - 3 bars lit (59–40%) - 2 bars lit (39–20%) - 1 bar lit (19–1%) Charging is available via USB-C cable. The built-in power source is a Li-pol 1800mAh, 3.7V battery. The built-in battery can only be replaced by the user after the warranty period. The replacement process is described in the manual. Please note that replacing the battery during the warranty period will void the warranty. WARNING! Using the lamp while charging is strictly prohibited. The lamp is well-protected and adapted for use in difficult and extreme conditions. It withstands mechanical loads and drops. It can fall from a height of 1m without damage. The lamp has dust and water protection – IP55 (partial dust protection and protection against low-pressure water jets directed at the product from any direction). Warranty on the lamp is 2 years, but it does not cover accessories.