LED rechargeable, portable light VIDEX VL-NL014W-S

SKU kods:
VL-NL014W-S
Svītru kods:
4820246485319
Manuālis:
  • Useful luminous flux of the light source (Lm):
    50
  • Correlated color temperature (K):
    3000/4000/6500K
  • Rated voltage (V), frequency (Hz):
    USB Type-C (5V, 0.5A), battery Li-pol 3.7V 750mAh
  • Place of application:
    Indoor - Mobile lighting - shelves, cabinets, small spaces
  • Lifetime (h):
    charging time 1.5h
  • Ingress protection (IP):
    IP20
  • Warranty (y):
    2
  • Measurements (mm):
    125X42,5X15
  • Outer box:
    120
  • Housing colour:
    White
  • Diffuser material:
    Polycarbonate (PC)
  • Housing material:
    Plastic
  • Motion sensor:
    Yes
LED Rechargeable Night Light with motion sensor VIDEX VL-NL014W-S is designed for localized lighting of household spaces, wardrobes, bookshelves, and similar areas. It illuminates a specific zone at night by detecting motion using the built-in sensor. ADVANTAGES AND FEATURES OF THE SET: - flexible adjustment of the lighting mode - built-in Li-pol 3.7V 600mAh battery - USB-C charging - charging time – 3 hours - infrared motion sensor included - sensor working distance – 4m - sensor detection angle – 120° - luminous flux – 50Lm - light color temperature – 3000K/4500K/6500K - beam angle – 120° - LED rated lifespan – 20 000 h - operating time – up to 7h SET CONTENT: 1. Light 2. Charging cable 3. Metal plate 4. Double-sided adhesive tape 5. User manual 6. Individual packaging INSTALLATION METHODS: a) Use the double-sided adhesive tape to permanently attach the light to any surface. Note that the product cannot be removed after installation. b) Use the built-in magnets to attach the light to any iron surface. c) Use the double-sided adhesive tape and metal plate to attach the plate to any surface, then use the built-in magnets to attach the light to the metal plate. OPERATING MODES: 1) Night Sensor. The light turns on automatically when the sensor detects motion at night/in the dark, then turns off after 20 seconds if no motion is detected. 2) Day Sensor. The light turns on automatically when the sensor detects motion during the day/in light, then turns off after 20 seconds if no motion is detected. 3) Constant Light. The light is turned on manually and remains on until switched off or the battery is discharged. CHARGING: Connect the USB-A end of the charging cable to a suitable power source and the USB-C end to the light. During charging, the indicator lights red. When fully charged, the indicator lights green. The original batteries are supplied pre-charged and can be used immediately after purchase. However, it is recommended to fully charge the battery before first use. For long-term storage, it is recommended to keep the battery partially charged to prolong its lifespan. Do not store the product with a fully discharged battery. Keep the set in a dry place, away from direct sunlight. Warranty period is 2 years.