LED rechargeable, portable light with remote control VIDEX VL-NL049W-R

SKU kods:
VL-NL049W-R
Svītru kods:
4820246485326
Manuālis:
  • Useful luminous flux of the light source (Lm):
    150
  • Correlated color temperature (K):
    3000/4000/6500K
  • Rated voltage (V), frequency (Hz):
    USB Type-C (5V, 1A), battery Li-ion 18650 2200mAh
  • Place of application:
    Indoor - Mobile lighting - shelves, cabinets, small spaces
  • Lifetime (h):
    charging time 3h
  • Ingress protection (IP):
    IP20
  • Warranty (y):
    2
  • Measurements (mm):
    300X39X36
  • Outer box:
    24
  • Housing colour:
    White
  • Diffuser material:
    Polycarbonate (PC)
  • Housing material:
    Plastic
  • Motion sensor:
    Yes
LED Rechargeable Light with Remote Control VIDEX VL-NL049W-R is designed for local lighting of household premises, wardrobes, bookshelves, and similar areas. ADVANTAGES AND FEATURES OF THE SET: - flexible adjustment of the lighting mode - built-in Li-ion battery 3.7V, 2200mAh - USB-C charging - charging time – 3 hours - luminous flux – 150Lm - color temperature – 3000K/4500K/6500K - beam angle – 120° - remote control with an operating distance of ≤10 m - nominal LED lifetime – 20 000 hours - operating time – up to 10 hours PACKAGE CONTENTS: 1) Lamp 2) Charging cable 3) Magnetic base 4) Double-sided adhesive tape 5) Remote control with CR2025 battery 6) User manual 7) Individual packaging METHODS OF INSTALLING THE LAMP a) Use the double-sided adhesive tape and the magnetic base to attach the lamp to any surface. Then attach the lamp to the magnetic base. Note that the adhesive tape cannot be removed and reused. b) Use the magnetic base to mount the lamp on any metal surface. After installation, you can adjust the tilt angle to change the direction of the light. OPERATING INSTRUCTIONS ON/OFF. Tap the touch button to turn the light on, change the color temperature, and turn the light off. Brightness adjustment. When the light is on, press and hold the touch button to adjust the brightness. REMOTE CONTROL 1. Turn on 2. Turn off 3. Warm white 4. Neutral white 5. Cold white 6. Increase brightness by one step 7. Decrease brightness by one step 8. Set brightness to 50% 9. Set brightness to 100% 10. Automatic shut-off timers. Press to set automatic light-off after 15/30/60/120 minutes respectively. CHARGING: Connect the USB-A plug of the charging cable to the appropriate power source and plug the USB-C end into the lamp’s input port. During charging, the indicator is red. When fully charged, the indicator turns green. Original batteries are supplied charged and can be used immediately after purchase. However, it is recommended to fully charge the battery before first use. For long-term storage, it is recommended to keep the battery not fully charged to extend its service life. Do not store the product with a discharged battery. Store the set in a dry place away from direct sunlight. The warranty period is 2 years.